← Projects

Tacoma Bumper Frame

A estimated model of the custom bumper designed and built by Kevin from Moab, UT. More info here: https://fabtoolkit.com/builds/tacoma-mod-custom-bumper-build/

Open in FabToolkit →
Tacoma Bumper Frame thumbnail

More Projects

7 others
Multi Branch Tube Notches / Copes
Multi Branch Tube Notches / Copes
A main pipe with three branches coming off it, each coped to fit tight against the outside of the run. The not…
Open project →
90 deg Tube Miter - 1.5in DOM 1020 Tube, .083in Wall
90 deg Tube Miter - 1.5in DOM 1020 Tube, .083in Wall
Two tubes meeting at a perfect right angle — the most common connection in fabrication and the one most often …
Open project →
45deg Tube Miter - 1.5in DOM 1020 Tube, .083in Wall
45deg Tube Miter - 1.5in DOM 1020 Tube, .083in Wall
A 45° tube connection sits right at the edge of what's easy to eyeball — the cut face is noticeably angled but…
Open project →
135 deg Tube Miter - 1.5in DOM 1020 Tube, .083in Wall
135 deg Tube Miter - 1.5in DOM 1020 Tube, .083in Wall
A 135° tube connection sits right at the edge of what's easy to eyeball — the cut face is noticeably angled bu…
Open project →
Infinity Symbol Assembly
Infinity Symbol Assembly
The infinity symbol (∞) looks deceptively simple as a sketch, but building it from steel tube is a different s…
Open project →
45 Degree Tube Notch - 1.5in Diameter x .083 Wall - DOM 1020
45 Degree Tube Notch - 1.5in Diameter x .083 Wall - DOM 1020
A 45-degree saddle cope for 1.5" OD DOM 1020 tube with .083" wall thickness. Angled copes are more complex tha…
Open project →
90 Degree Tube Notch - 1.5" Diameter x .083 Wall - DOM 1020
90 Degree Tube Notch - 1.5" Diameter x .083 Wall - DOM 1020
A 90-degree saddle cope for 1.5" OD DOM 1020 tube with .083" wall thickness — one of the most common specs in …
Open project →