← Projects

45deg Tube Miter - 1.5in DOM 1020 Tube, .083in Wall

A 45° tube connection sits right at the edge of what's easy to eyeball — the cut face is noticeably angled but the rotation still has to be spot on or the joint won't pull tight. Open this project in the FabToolkit Miter Template Generator to edit and inspect the geometry, confirm the angles, and generate print-ready miter templates for your exact tube size. Good starting point for sharp corners, braces, and angled runs.

Open in FabToolkit →
45deg Tube Miter - 1.5in DOM 1020 Tube, .083in Wall thumbnail

More Projects

6 others
Multi Branch Tube Notches / Copes
Multi Branch Tube Notches / Copes
A main pipe with three branches coming off it, each coped to fit tight against the outside of the run. The not…
Open project →
90 deg Tube Miter - 1.5in DOM 1020 Tube, .083in Wall
90 deg Tube Miter - 1.5in DOM 1020 Tube, .083in Wall
Two tubes meeting at a perfect right angle — the most common connection in fabrication and the one most often …
Open project →
135 deg Tube Miter - 1.5in DOM 1020 Tube, .083in Wall
135 deg Tube Miter - 1.5in DOM 1020 Tube, .083in Wall
A 135° tube connection sits right at the edge of what's easy to eyeball — the cut face is noticeably angled bu…
Open project →
Infinity Symbol Assembly
Infinity Symbol Assembly
The infinity symbol (∞) looks deceptively simple as a sketch, but building it from steel tube is a different s…
Open project →
45 Degree Tube Notch - 1.5in Diameter x .083 Wall - DOM 1020
45 Degree Tube Notch - 1.5in Diameter x .083 Wall - DOM 1020
A 45-degree saddle cope for 1.5" OD DOM 1020 tube with .083" wall thickness. Angled copes are more complex tha…
Open project →
90 Degree Tube Notch - 1.5" Diameter x .083 Wall - DOM 1020
90 Degree Tube Notch - 1.5" Diameter x .083 Wall - DOM 1020
A 90-degree saddle cope for 1.5" OD DOM 1020 tube with .083" wall thickness — one of the most common specs in …
Open project →